How to Calculate Quantity of Steel In One Way Slab|One Way Slab BBS

How to Calculate Quantity of Steel In One Way Slab

One Way Slab One way slab is provided when the L/B ratio is equal to or greater than two. It is supported only on two opposite sides by rigid supports and it carries the load by flexure in the perpendicular direction to the support. Uniformly loaded one-way slab deform into the cylindrical surface and hence …

Read moreHow to Calculate Quantity of Steel In One Way Slab|One Way Slab BBS

Beam VS Lintel – Difference Between Beam And Lintel

Difference Between Beam and Lintel

Lintel and beam both are horizontal members of the building but they are different from each other. Beam and lintel have different functions and vary in technical aspect as well. So, in this article, we will see the difference between beam and lintel. so let’s start Difference Between Beam And Lintel Concept¬† It is the …

Read moreBeam VS Lintel – Difference Between Beam And Lintel

What is Lap Length? – Complete Guide

What is Lap Length?

What is Lap Length? The lap length is the length provided to overlap two rebars in order to safely transfer load from one bar to another bar and alternative to this is to provide mechanical couplers.  Lap length also known as lap splices. Suppose we need to construct the building of 20-metre height but there …

Read moreWhat is Lap Length? – Complete Guide

What is Development Length? – Complete Guide

What is Development Length?

What is Development Length? It is the minimum length of the bar which must be embedded in concrete beyond any section to develop its full strength. This is also called as an anchorage length in case of axial tension or axial compression and development length in case of flexural tension or flexural compression. It is …

Read moreWhat is Development Length? – Complete Guide